background image

Notice

 

Connections that exceed any of the maximum ratings of any connector on

the PCIe-5774 can damage the device and the system. NI is not liable for any
damage resulting from such connections.

Configuring the PCIe-5774 in MAX

Use Measurement & Automation Explorer (MAX) to configure your NI hardware. MAX
informs other programs about which NI hardware products are in the system and how they are
configured. MAX is automatically installed with FlexRIO.
1.

Launch MAX.

2.

In the configuration tree, expand 

Devices and Interfaces

 to see the list of installed NI

hardware.

Note

 

If you do not see your module listed, press <F5> to refresh the list of

installed modules. If the module is still not listed, power off the system, ensure
the module is correctly installed, and restart.

3.

Record the identifier MAX assigns to the hardware. Use this identifier when
programming the PCIe-5774.

4.

Self-test the hardware by selecting the item in the configuration tree and clicking 

Self-

Test

 in the MAX toolbar.

The MAX self-test performs a basic verification of hardware resources.

FlexRIO Examples

FlexRIO includes several example applications for LabVIEW. These examples serve as
interactive tools, programming models, and as building blocks in your own applications.

Accessing FlexRIO Examples

FlexRIO examples are available in LabVIEW's NI Example Finder. Complete the following
steps to access the examples by task.
1.

In LabVIEW, click 

Help

»

Find Examples

.

2.

In the 

NI Example Finder

 window that appears, click 

Hardware Input and Output

»

FlexRIO

.

The examples are sorted by task. Click on an example and refer to the 

Information

window for a description of the example. Refer the 

Requirements

 window for a list of

hardware devices that can run the example.

You can also click the Search tab to search all installed examples by keyword. For
example, search for 

FlexRIO

 to locate all FlexRIO examples.

Examples also are available online that demonstrate FlexRIO basics, such as using DRAM,
acquiring data from adapter modules, and performing high throughput streaming. Refer to 

ni.com/examples

 for these examples and for more information.

10

  | 

ni.com

  | 

PCIe-5774 Getting Started Guide

Summary of Contents for PCIe-5774



















Reviews: