manualshive.com logo in svg

National Instruments PCIe-5774, Getting Started Manual, Page: 16 / 18

Share
Download
National Instruments PCIe-5774 Getting Started Manual Download Page 16

5.

Verify the PCIe-5774 appears in the Device Manager.
a)

Under an NI entry, confirm that a PCIe-5774 entry appears.

Note

 

If you are using a PC with a device for PXI remote control system,

under 

System Devices

, also confirm that no error conditions appear for the

PCI-to-PCI Bridge

.

b)

If error conditions appear, reinstall FlexRIO and the PCIe-5774.

What Should I Do if the PCIe-5774 Fails the Self-Test?

1.

Restart the system.

2.

Launch MAX, and perform the self-test again.

3.

Power off the chassis.

4.

Reinstall the failed module in a different slot.

5.

Power on the chassis.

6.

Perform the self-test again.

Where to Go Next

Refer to the following figure for information about other product tasks and associated
resources for those tasks.

SUPPORT

Services
ni.com/services

NI Community
ni.com/community

Support
ni.com/support

SOFTWARE

HARDWARE

Configuring a Project
FlexRIO Help

Learn LabVIEW Basics
ni.com/gettingstarted

FlexRIO Examples
NI Example Finder

PCIe-5774 Specifications

ni.com/manuals

16

  | 

ni.com

  | 

PCIe-5774 Getting Started Guide

Summary of Contents for PCIe-5774



















Reviews:

No comments