National Instruments NI PXIe-8130 User Manual Download

Page: 82 / 84

Index

National Instruments Corporation

I-3

NI PXIe-8130 User Manual

NI PXIe-8130 installed in a PXI Express

chassis (figure), 2-3

procedure, 2-1
removing NI PXIe-8130 from PXI

Express chassis, 2-4

removing protective screw caps

(figure), 2-2

installing an OS

from USB CD/DVD-ROM, 2-24
overview, 2-24

installing the GPIB driver, 4-4
installing the video driver, 4-3
instrument drivers (NI resources), B-1

keyboard, plugging PS/2 mouse and keyboard

into controller, 4-2

KnowledgeBase, B-1

LabVIEW, 1-5
LabVIEW RT

configuration switches, 2-18

figure, 2-19

LabWindows/CVI, 1-6
LEDs, front panel LEDs, 3-16, 4 -1
Linux support, 1-7
LPT cable, connecting to NI PXIe-8130, 4-3

main BIOS setup menu, 2-5
manuals directory, 2-19
mating connector

COM1, 3-5
Ethernet, 3-6
GPIB (IEEE 488.2), 3-12
parallel port, 3-8

Measurement Studio, 1-6

modular instruments, 1-6
mouse, plugging PS/2 mouse and keyboard

into controller, 4-2

National Instruments

software, 1-5
support and services, B-1

NI PXIe-8130

benefits of PXI Express, 1-1
BIOS setup utility, 2-4
block diagram, 1-3
connectors

COM1 connector and signals, 3-5
DVI-I connector and signals

(table), 3-3

ExpressCard connector and

signals, 3-14

GPIB (IEEE 488.2) connector and

signals, 3-12

parallel port connector and

signals, 3-8

trigger connector and signals, 3-11
Universal Serial Bus (USB)

connector and signals, 3-10

CPU and I/O boards (figure), 1-5
data storage, 3-16
description, 1-2
front panel

connectors, 3-1
dimensions, 3-2
features, 3-16
LEDs, 4-1
system reset pushbutton, 3-16

functional overview, 1-3
hard drive recovery, 2-23
installing DDR SO-DIMMs

(figure), 2-23, 4 -5

installing in a PXI Express chassis, 2-1

figure, 2-3

Summary of Contents for NI PXIe-8130





















































































Search results

Summary of Contents for NI PXIe-8130

Reviews:

Related manuals for NI PXIe-8130

Brands by name

Popular brands

National Instruments NI PXIe-8130, User Manual

Search results

Summary of Contents for NI PXIe-8130

Reviews:

Related manuals for NI PXIe-8130

Brands by name

Popular brands