National Instruments NI PXIe-8105 User Manual Download

Page: 72 / 76

Index

NI PXIe-8105 User Manual

I-2

ni.com

data storage, 3-16
DDR SO-DIMMs

installing, 2-15, 4-4

figure, 2-16, 4-5

DDR2 SO-DIMMs

from National Instruments (note), 2-15,

4-4

Declaration of Conformity (NI resources), B-1
diagnostic tools (NI resources), B-1
directories and files installed on hard

drive, 2-12

discarding BIOS changes without

exiting, 2-11

documentation

conventions used in manual,

vii

how to use this documentation set,

vii

NI resources, B-1
related documentation,

viii

DRIVE LED, 3-16
drivers, 2-12

directory, 2-12
installation

GPIB (IEEE 488.2), 4-3
video, 4-3

NI resources, B-1
obtaining latest drivers, 4-5

DVI-I, connector signals (table), 3-3

electrical specifications, A-2
electromagnetic compatibility, A-4
entering the BIOS setup, 2-4
Ethernet, connector, 3-1

location and pinout (figure), 3-6
signals (table), 3-6

examples (NI resources), B-1

exiting BIOS

discarding changes, 2-10
setup menu, 2-10
with changes saved, 2-10

ExpressCard, 2-18, 3-14

connector location and pinout

(figure), 3-14

connector signals (table), 3-15
installing a module, 2-18
module connector, 3-1
removing a module, 2-18

features of PXI Express, 2-13
files and directories installed on hard

drive, 2-12

floppy drive, using external floppy drive, 4-5
front panel

connectors, 3-1

Ethernet, 3-1
ExpressCard, 3-1, 3-14
GPIB, 3-1, 3-12
parallel port, 3-1, 3-8
PXI trigger, 3-1
serial, 3-1, 3 -5
trigger, 3-11
USB, 3-1, 3-10
video, 3 -3

dimensions, 3-2
features, 3-16
LEDs, 4-1

functional overview of NI PXIe-8105, 1-2

Summary of Contents for NI PXIe-8105













































































Search results

Summary of Contents for NI PXIe-8105

Reviews:

Related manuals for NI PXIe-8105

Brands by name

Popular brands

National Instruments NI PXIe-8105, User Manual

Search results

Summary of Contents for NI PXIe-8105

Reviews:

Related manuals for NI PXIe-8105

Brands by name

Popular brands