©
National Instruments Corporation
1-1
GPIB-ENET for MacOS
Chapter
1
Introduction
This chapter lists what you need to get started and optional equipment
you can order, gives instructions for inspecting your GPIB-ENET, and
briefly describes the NI-488.2 software, the GPIB-ENET hardware, and
its assigned Ethernet address.
What You Need to Get Started
❑
One of the following boxes:
GPIB-ENET - 10Base-T Version (100 to 120 VAC)
GPIB-ENET - 10Base-T Version (220 to 240 VAC)
GPIB-ENET - Coax Version (100 to 120 VAC)
GPIB-ENET - Coax Version (220 to 240 VAC)
❑
One of the following power cords:
U.S.A. standard power cord
Switzerland power cord
Australian power cord
Universal European power cord
North American power cord
U.K. power cord
❑
3.5 in. NI-488.2 Software for MacOS Distribution Disk
❑
TCP/IP driver software installed
Optional Equipment
You can call National Instruments to order any of the following
optional equipment:
•
Ethernet Cables:
Twisted Pair (10Base-T) Cables
Coax (10Base-2) Cables
AUI (10Base-5) Cables
