Chapter 1
Introduction
©
National Instruments Corporation
1-5
GPIB-ENET for MacOS
Side Panel Connectors
Figure 1-2 shows the side panels of the 10Base-T and coax versions of
the GPIB-ENET.
Figure 1-2.
GPIB-ENET Side Panel
Both versions of the GPIB-ENET contain an Ethernet AUI connector.
You can verify which type of GPIB-ENET you have by comparing the
other connector to the two options shown in Figure 1-2.
Back Panel Switches
The GPIB-ENET has a 2-position slide switch and an 8-bit DIP switch
that you use to configure the operating characteristics of the box. These
switches are located on the back panel of the GPIB-ENET, as shown in
Figure 1-3.
Figure 1-3.
GPIB-ENET Back Panel
Ethernet AUI
Connector
Ethernet AUI
Connector
10Base-T Connector
Coax Connector
10Base-T Version
Coax Version
10BASE-T
AUI
8 7 6 5 4 3 2 1
ON
