Appendix B
Utilities
GPIB-ENET for MacOS
B-4
©
National Instruments Corporation
flash. Other patterns are used to indicate that the EEPROMs
did not program properly. If a pattern other than 00 is
indicated, make note of the flashing pattern before switching
off the GPIB-ENET, and contact National Instruments for
further assistance. Refer to the section READY LED Signaling
in Chapter 4, Installation Verification and Troubleshooting,
for more information on recording the flashing pattern.
4.
Power off the GPIB-ENET and return DIP switch 7 to the OFF
position.
5.
Power on the GPIB-ENET and wait for the READY LED to remain
steady without flashing.
