NI 9205/9206 Calibration Procedure
4
ni.com
You can access the NI-DAQmx header file,
NIDAQmx.h
, like any standard
library. You can find examples of how to use the NI-DAQmx driver in the
Program Files\National Instruments\NI-DAQ\Examples
directory.
Documentation
You might find the following documentation helpful as you write the
calibration procedure:
•
NI-DAQmx Help
—This help file contains general information about
measurement concepts, key NI-DAQmx concepts, and common
applications that apply to all programming environments. To access
this help file, select
Start»All Programs»National Instruments»
NI-DAQ»NI-DAQmx Help
.
•
NI-DAQmx C Reference Help
—This help file contains C reference and
general information about measurement concepts. To access this help
file, select
Start»All Programs»National Instruments»NI-DAQ»
NI-DAQmx C Reference Help
.
•
DAQ Getting Started Guide
for NI-DAQ 8.0 or later—This guide
describes how to install NI-DAQmx for Windows software and
NI-DAQmx-supported DAQ devices, and how to confirm that your
device is operating properly. To access this guide, select
Start»
All Programs»National Instruments»NI-DAQ»DAQ Getting
Started Guide
.
Note
The documents above are installed with NI-DAQmx. You can also download the
latest versions from the NI Web site at
ni.com/manuals
.
•
NI 9205 Operating Instructions
/
NI 9206 Operating Instructions
—
These documents contain information about specific device features.
The limits you use to verify the accuracy of the devices are based on
the specifications found in this document. You can download the latest
versions of these documents from the NI Web site at
ni.com/
manuals
.