20
NARVON
5. Extract the mixer and remove the seal (A).
7.4. Washing and sanitizing the
components
All of the previously disassembled components must be
thoroughly washed and sanitized.
Users should utilize the three sink method to properly clean
all components.
1. To properly carry out the three sink method:
- Fill one basin with a neutral cleaning detergent mixed in
lukewarm water
- Leave one basin empty for rinsing
- Fill a third basin with sanitizing solution mixed in
lukewarm water
2. In the first basin, thoroughly wash all components, except
the lid, in the mild cleaning detergent with a soft cloth or
sponge.
3. Rinse all components in water.
4. After rinsing, use a soft cloth or sponge to wipe down all of
the components in the sanitizing solution, before rinsing for
a final time.
5. Place the components on a clean surface to dry.
NOTE: The lid and evaporators should be
carefully wiped down with a soft cloth without
submerging with water, as to not damage
electrical components.
7.5. Reassembling the washed
components
All of the washed and sanitized components must be
carefully reassembled. Some components must be
adequately lubricated in order to ensure that they work
efficiently.
Reapply the seal (A) on the mixer as shown in the Fig.35.
A
Fig. 33
Fig. 35
