background image

4

NARVON

1. GENERAL INFORMATION 

 

1.1.  

Manufacturer

The manufacturer’s details are shown on the identification plate.

 

1.2.  Authorized persons

Two types of people may access the machine for different purposes:

User

A person who has adequate technical training to operate this slushy machine.

After reading this manual, they will be capable of:
•  carrying out normal product loading and/or replacement operations;
•  properly dispensing the product;
•  cleaning and sanitizing the machine.

Specialized technician

A person who has examined this manual and has specific training in the installation, use, and servicing of the slushy 
machine:

•  must be able to carry out repairs and be well acquainted with this manual and all the information regarding safety;
•  must be able to understand the contents of the manual and correctly interpret drawings and diagrams;
•  must be familiar with sanitation methods, accident prevention, technological, and safety standards;
•  must have specific experience in servicing slushy machines;
•  must know how to act in case of emergency, where to find individual safety equipment and how to use it properly.

Persons who do not meet the above requirements must  

not be allowed to use the machine.

1.3.  Layout of the manual

The purchaser/user must carefully read the information contained in this manual.

1.3.1.  Purpose and contents

The purpose of this manual is to provide the Purchaser with all the necessary information regarding the installation, 
maintenance, and use of the slushy machine.

Before carrying out any operation on the machine, users and specialized technicians must carefully 

read the instructions.

Should you have any doubts about the correct interpretation of these instructions, contact the manufacturer to request the 
necessary explanations.

You should not carry out any type of operation until you have read and thoroughly understood the 

contents of this manual.

1.3.2.  Who must read the manual

This manual is aimed at users and specialized technicians.

Users must not attempt to carry out any operations restricted to specialized technicians.

The manufacturer will not be liable for any damage or injury caused as a result of failure to comply with this rule.

The instruction manual is an integral part of the product purchased and must therefore be handed over to any  
subsequent owners.

Summary of Contents for SLUSHY 378SM2





























Reviews: