19
NARVON
After all contents have been emptied, turn off both the main
switch and mixer switch and unplug the machine.
7.2. Disassembling the
dispensing tap
Before removing the bowl it is recommended to disassemble
the tap; after cleaning, the tap must not be reapplied until
the bowl has been correctly positioned in its seat.
Disassemble the tap by removing the pin from its seat to
release all the other parts. Push the push lever dispenser
until it makes contact with the tank and pull upwards as
shown.
Never disassemble the tap if the product or
any other liquid is present inside the bowl.
7.3. Removing the bowl and the lid
To remove a bowl correctly proceed as follows:
1. Remove the lid as shown in Section 6.1.;
2. Raise the front part of the bowl to release it;
3. Remove the bowl from its seat by pushing and tapping
lightly on the rear;
4. Remove the bowl gasket (B);
Fig.27
Fig. 28
Fig.30
Fig.31
Fig.32
B
Fig.32
