NARDA PMM 7010 Series, User Manual

Page: 38 / 76

5-2 Updating Firmware
Click on “ 7010SeriesUp” (7010SeriesUp.exe) once for running the update
program, so getting the following window:
Two firmware components can be updated by this application: Firmware,
which is the receiver internal program, and FPGA, to update the internal
programmable logic.
The
7010FW.ldr file required for Firmware updating and the main7010.bin
file for FPGA are automatically stored in the same directory of the
7010SeriesUp.exe , otherwise just copy them there before performing the
upgrade.
Be sure the power to the PMM 7010 is stable and reliable before
performing the FW Upgrade, otherwise the upgrade progress could not
terminate properly.
Anyway, even in case of failure, the internal BIOS will never be
corrupted and you’ll just need to repeat the procedure once more (this
is a unique feature!).
Should FW Upgrade procedure stop before reaching the 100%
completion that will have not to be considered a trouble but simply an
intermediate step: in this case please switch OFF and ON the receiver
and repeat the FW Upgrade procedure once more until the end.
Always cycle power OFF and ON again after every FW Upgrade.
Choose the COM port from the pulldown menu.
Press
RS232 button or Enter key to set the com port.