NARDA PMM 7010 Series, User Manual

Page: 63 / 76

Remote control 7-13
SMAN This setting command puts the 7010 in manual mode. The reply is always MAN=OK
which acknowledges the command has been granted.
The 7010 goes to manual mode.
Example:
#SMAN *
SMANP This setting command puts the 7010 in manual mode and sets the default value to
the following settings:
• RBW Automatic
•
Attenuator Automatic
•
MinAtt=10 dB
• Preselector On
•
Preamplifier OFF
•
Hold Time =1000ms
• Pulse Limiter = OFF
•
TG=OFF
The reply is always MANP=OK which acknowledges the command has been
granted.
The 7010 goes to manual mode.
Example:
#SMANP*
SMAT a
This setting command sets Attenuator, for Manual Mode, to the value indicated by
(a) which can be 0 to 35 (55). Automatic Attenuator feature is disabled. If (a) is a
negative figure then the Automatic Attenuator feature is turned on. The reply is
MAT=OK which acknowledges the command has been granted or MAT =SERR if
the command has been ignored.
When the command is granted the 7010 goes to manual mode automatically.
Example:
#SMAT 15* (set attenuator to 15dB and disable Automatic Attenuator
feature)
Example:
#SMAT -1* (Enable Automatic Attenuator feature)
SMHT h This setting command sets hold time for manual mode. The string (h) should be
expressed in ms. The reply is
MHT=OK which acknowledges the command has
been granted or MHT =SERR if the command has been ignored.
When the command is granted the 7010 goes to manual mode automatically.
Example:
#SMHT 1500* Sets the hold time, for manual mode, to 1500 ms (or 1.5s)
SRBW b This setting command sets RBW. The argument (b) should be a string representing
the RBW as follows:
o
0  RBW is Automatic so that the 7010 automatically selects the
suitable RBW according to the tuned frequency
o
1  300kHz
o
2  100kHz
o
3  30kHz
o
4  10kHz
o
5  3kHz
o
6  9kHz (Cispr 16-1)
o
7  200Hz (Cispr 16-1) (Option)
o
8  1kHz (Option)
o
Only for Radiated
 10  120kHz (Cispr 16-1)
 9  1MHz (Option)
The reply is RBW =OK which acknowledges the command has been granted or
RBW =SERR if the command has been ignored.
Example: #S RBW 3* sets the RBW to 30kHz and disables Auto RBW mode
Example: #S RBW 0* turn the RBW mode in Automatic