NARDA PMM 7010 Series, User Manual

Page: 73 / 76

Remote control 7-23
7.6.5 Procedure
to read a
measure
stored by
PMM 7010
1. Send the command #?FSF n * .
2. Wait for the size of array
3. Wait for the first 1024 bytes in order to get both main and sweeps header
4. Read the relevant data concerning Start, Stop of full sweep as well as single
sub-sweeps if they are more than one.
5. Go to the offset OffRec1 (OffRec1 *2) in the received buffer and read all the
LenRec1 levels.
6. If the number of Sub-Sweeps is 2, go to the offset OffRec2 in the received
buffer and read all the LenRec2 levels.
7. Next Address is ( LenRec1)*2