13
Wi-Fi
Here you have to set the Wi-Fi parameters.
SSID WLan: the name of the wireless network you intend to use
Password WLan: the password of that specific wireless network
Remote IP address: this is the IP address of the area monitor, default 192.168.1.1
Port: the number of the port, used by the area monitor, default 5000
AP Password: this is the access point password, the password used by the area monitor, it is not
mandatory
In this section, last 3 parameters (Remote IP address, Port and AP Password) are used only for the
over ip connection. In case the Wi-Fi communication is just used in FTP mode you can leave these
windows blank.
Wi-Fi Connection
Direct AP: direct to the Access Point. In this case there is a direct communication between the area
monitor and the computer
Remote IP: remote Internet Protocol. with these option you can choose to work in a point to point
connection or also in FTP
Once all fields are filled, push the button Set.
The button Read is used to verify what parameters are recorded in an area monitor.
