16
Now switch the main panel of the software into Point to Point mode and add a new station. It always
better add and remove stations instead of change an existing one.
Now:
- Insert the Station Identifier: it is the name you decide to give to your monitor station. As default it is
the serial number of the station.
- Insert the Telephone Number: even if the connection is Wi-Fi, the telephone number is necessary to
add tha station in the grid. In this case ii can also be invented
- Insert the Device Password: this is the AP password you assigned at the monitor station, as default
it is blank
For every field the computer will request the Terminal Password
