EN
W415-4001 / B / 06.15.22
15
finishing
!
WARNING
48.3
• Failure to position the logs in accordance with these diagrams or failure to use only logs specifi cally approved
with this appliance may result in property damage or personal injury.
• Logs must be placed in their exact location in the appliance. Do not modify the proper log positions, since
appliance may not function properly and delayed ignition may occur.
• The logs are fragile and should be handled with care.
If applicable, insert the following statement:
“
PHAZER™
logs [and glowing embers], exclusive to Napoleon/Continental, provide a unique and realistic
glowing effect that is different in every installation. Take the time to carefully position the glowing embers for a
maximum glowing effect. Log colours may vary. During the initial use of the appliance, the colours will become
more uniform as colour pigments burn in during the heat-activated curing process.”
note:
Log numbers are located on the bottom or back of the logs.
IF APPLICABLE, INSERT DRAWING OF BURNER/SUPPORT WITH APPROPRIATE LA-
BELS (I.E. STUDS, PILOT SHIELD, BURNER PORTS, ETC.).
IF NOT APPLICABLE, HIDE THIS SECTION AND USE BOXES BELOW.
Burner Overview
IF APPLICABLE, USE THIS BOX TO SHOW
“NATURAL GAS ONLY” LOG PLACEMENT.
PLACE TEXT BOX HERE.
NOTE:
ENSURE NOMENCLATURE IS
CONSISTENT THROUGHOUT.
PLACE TEXT BOX HERE.
NOTE:
ENSURE NOMENCLATURE IS
CONSISTENT THROUGHOUT.
PLACE TEXT BOX HERE.
NOTE:
ENSURE NOMENCLATURE IS
CONSISTENT THROUGHOUT.
PLACE TEXT BOX HERE.
NOTE:
ENSURE NOMENCLATURE IS
CONSISTENT THROUGHOUT.
PLACE TEXT BOX HERE.
NOTE:
ENSURE NOMENCLATURE IS
CONSISTENT THROUGHOUT.
PLACE TEXT BOX HERE.
NOTE:
ENSURE NOMENCLATURE IS
CONSISTENT THROUGHOUT.
PLACE TEXT BOX HERE.
NOTE:
ENSURE NOMENCLATURE IS
CONSISTENT THROUGHOUT.
PLACE TEXT BOX HERE.
NOTE:
ENSURE NOMENCLATURE IS
CONSISTENT THROUGHOUT.
IF SPACE IS LEFT OVER, USE THIS BOX TO
SHOW CORRECT FINAL LOG
PLACEMENT WITH PHOTOS.
IF NOT, USE BOXES AS ABOVE.
IF SPACE IS LEFT OVER, USE THIS BOX TO
SHOW CORRECT FINAL LOG PLACEMENT
WITH LINE DRAWINGS.
IF NOT, USE BOXES AS ABOVE.
Propane Models Only:
Natural Gas Models Only:
PLACE TEXT BOX HERE.
NOTE:
ENSURE NOMENCLATURE IS
CONSISTENT THROUGHOUT.
PLACE TEXT BOX HERE.
NOTE:
ENSURE NOMENCLATURE IS
CONSISTENT THROUGHOUT.
IF APPLICABLE, USE THIS BOX TO SHOW
“PROPANE ONLY” LOG PLACEMENT.
Insert only if
applicable ---->
Log Number
Part Number
Description
1
2
3
4
5
6
7
8
9
10
Pilot Shield
Burner Ports
Studs
(Log #2)
Studs
(Log #3)
Lower Media Tray
(Logs #6, #7, and #8)
A1
A2
B2
B1
1
Pilot Shield Notch
1
1
1
3
2
Notches
4
Notch
1
3
2
4
Notches
5
Notch
1
3
2
4
5
6
1
3
2
4
5
6
7
1
3
2
4
5
6
7
8
B1
B2
2
A1
A2
3
3
Pilot Shield
Burner Ports
Studs
(Log #2)
Studs
(Log #3)
Lower Media Tray
(Logs #6, #7, and #8)
A1
A2
B2
B1
1
Pilot Shield Notch
1
1
1
3
2
Notches
4
Notch
1
3
2
4
Notches
5
Notch
1
3
2
4
5
6
1
3
2
4
5
6
7
1
3
2
4
5
6
7
8
B1
B2
2
A1
A2
3
3
Pilot Shield
Burner Ports
Studs
(Log #2)
Studs
(Log #3)
Lower Media Tray
(Logs #6, #7, and #8)
A1
A2
B2
B1
1
Pilot Shield Notch
1
1
1
3
2
Notches
4
Notch
1
3
2
4
Notches
5
Notch
1
3
2
4
5
6
1
3
2
4
5
6
7
1
3
2
4
5
6
7
8
B1
B2
2
A1
A2
3
3
Pilot Shield
Burner Ports
Studs
(Log #2)
Studs
(Log #3)
Lower Media Tray
(Logs #6, #7, and #8)
A1
A2
B2
B1
1
Pilot Shield Notch
1
1
1
3
2
Notches
4
Notch
1
3
2
4
Notches
5
Notch
1
3
2
4
5
6
1
3
2
4
5
6
7
1
3
2
4
5
6
7
8
B1
B2
2
A1
A2
3
3
Pilot Shield
Burner Ports
Studs
(Log #2)
Studs
(Log #3)
Lower Media Tray
(Logs #6, #7, and #8)
A1
A2
B2
B1
1
Pilot Shield Notch
1
1
1
3
2
Notches
4
Notch
1
3
2
4
Notches
5
Notch
1
3
2
4
5
6
1
3
2
4
5
6
7
1
3
2
4
5
6
7
8
B1
B2
2
A1
A2
3
3
Pilot Shield
Burner Ports
Studs
(Log #2)
Studs
(Log #3)
Lower Media Tray
(Logs #6, #7, and #8)
A1
A2
B2
B1
1
Pilot Shield Notch
1
1
1
3
2
Notches
4
Notch
1
3
2
4
Notches
5
Notch
1
3
2
4
5
6
1
3
2
4
5
6
7
1
3
2
4
5
6
7
8
B1
B2
2
A1
A2
3
3
1.
Place log #1 snug against the back wall,
ensuring the notch fits around the pilot shield.
2.
Place the two holes in log #3 on A1 and A2. Do
not cover any burner ports.
3.
Place the two holes in log #2 on B1 and B2.
Do not cover any burner ports.
4.
Place log #4 on the left-side notch of log #1
and the two notches of log #3.
5.
Place log #5 on the right-side notch of log #1
and the two notches of log #2.
6.
Place log #6 along the left side of the lower
media tray.
