Napoleon GDS60-1N, Installation And Operating Instructions Manual

Page: 48 / 124

48
EN
W415-1328 / A / 01.05.16
77.3
Vertical installations may display a very active fl ame. If this appearance is not desirable, the vent exit must
be restricted using a restrictor vent kit. Refer to “ACCESORIES” in the “REPLACEMENTS” section for the
appropriate kit. This will reduce the velocity of the exhaust gases, slowing down the
fl ame pattern and creating
a more traditional gentle fl ame appearance. Speci fi c instructions are included with the kit.
It’s important to periodically perform a visual check of the pilot and burner fl ames. Compare them to the
illustration provided. If any fl ames appear abnormal call a service person.
FLAME MUST ENVELOP
UPPER 3/8” (9.5mm) TO 1/2”
(12.7mm) OF FLAME SENSOR
PILOT
BURNER
ELECTRODE
FLAME
SENSOR
3/8” - 1/2”
(9.5mm - 12.7mm)
54.1B
10.3 FLAME CHARACTERISTICS
10.4 RESTRICTING VERTICAL VENTS - MODEL GDS60-1