38
EN
W415-1328 / A / 01.05.16
When removing the glass door, a simple procedure must be followed in order to not damage the components.
6.3 GLASS DOOR INSTALLATION AND REMOVAL
Care must be taken when removing and installing door to ensure that the gasket at the top of the door does
not bunch.
B.
Remove securing bolts on cast front
(located behind either side on the top)
using a 10 mm wrench (not provided).
C.
Tilt top of cast front forward and lift
out.
A.
Lift the cast top off of appliance.
D.
Open valve control door
E.
Pull quick release handles (located on
either side on the bottom) forward and
release 'T' latches. The 'T' latch is threaded
and can be loosened or tightened to adjust
for an effective door seal.
F.
Lift glass door up and off edge of
fi
re
box top and slide glass door under
top retainers to remove.
1
2
Summary of Contents for GDS60-1N
Page 121: ...119 W415 1328 A 01 06 16 FR 20 0 NOTES 44 1...
Page 122: ...120 W415 1328 A 01 06 16 FR 44 1...
Page 123: ...44 1...
