background image

4. PRECAUTIONS BEFORE OPERATION

4.1 Application 

This iron is intended to be be used exclusively for the ironing of textile fabrics and/or garments. 

Please do not use it for any purpose other than the above-mentioned. 

This iron is for professional and industrial use, not for household use, and it requires steam supplied

from a steam-boiler. 

4.2 Warning & Cautions in General 

WARNING

 

Hot steam is gushing from iron!

 

Do not hold iron upside down

 

nor directly toward any person.

CAUTION

 

Do not apply the iron to any 

 

materials other than textile

 

fabrics. Some materals may 

 

easily melt, scorch and/or

 

deform with heat. 

WARNING

 

Do not place inflammables,

 

chemicals or oils and fats near

 

the iron at any time. 

CAUTION

 

Provide steam of an appropriate

 

pressure under 0.5 MPa (5 bar)

 

for the iron according to the

 

particular fabric to be worked on.  

0.5 

    MPa

WARNING

 

Be sure to cut the steam source

 

for the iron before leaving the

 

iron unattended.

WARNING

 

Iron is hot.

 

Do not touch any part of the

 

iron other than the iron grip

 

with bare hands. 

CAUTION

 

Do not drop iron as it may

 

cause injuries and/or damage.

 

Always place it securely on the 

 ron-rest

Summary of Contents for HSP Series










Reviews: