Safety precautions
Review and follow the safety instructions below :
·
If water or other material enters the instrument, adaptor, or power inlet, disconnect the
power cord and contact a service person. For operating environment, Check product
Specifications (Refer to page 70).
· Do not touch the main plug or power cord with wet hands.
· Always ensure that the power supply input voltage matches the voltage available at
your location.
· This instrument is air-cooled and its surfaces may become hot during operation.
During installing, leave a space of more than 10 cm (4 inches) around the instrument
and do not place any objects between the instrument and the walls.
· Do not install an instrument on a slant or a place prone to vibrations, which
induces the risk of malfunction or damage of the instrument.
· Never insert any objects into the air vents of the instrument as this could result in
electrical shock, personal injury, and equipment damage.
· Plug the power cord firmly into the wall outlet and AC adapter.
· To avoid potential shock hazard, make sure that the power cord is properly grounded.
· Be sure to position the equipment such that it is easy to disconnect.
· Turn off the instrument before unplugging the power cord and/or moving the
instrument.
· If the instrument is dropped or broken, disconnect the power cord and contact a
service person. Disassembly of case will void warranty.
· Use only authorized accessories (adaptor, power cord, and USB drive).
Warning
Class A equipment is intended for use in an industrial environment. In the documentation for the user, a statement shall be
included drawing attention to the fact that there may be potential difficulties in ensuring electromagnetic compatibility in other
environments, due to conducted as well as radiated disturbances.
68
