manualshive.com logo in svg

NanoEnTek JuLI FL, User Manual

Share
Download
NanoEnTek JuLI FL User Manual Download Page 63

Cleaning & maintenance

Clean the surface of JuLI™ FL instrument with a damp cloth. 
To clean the LCD screen, turn off JuLI™ FL instrument, disconnect the power cable, 
and clean the LCD screen with a soft cloth lightly moistened with LCD cleansing 
detergent. Cleaning the screen with excessive force can damage the LCD screen. 

If liquid spills on JuLI™ FL, turn off the power immediately and wipe dry.

JuLI™ FL  does not need regular maintenance. To troubleshoot problems 
with JuLI™ FL, contact Technical Support (Refer to page 72). 

       IMPORTANT 

Never disassemble or service JuLI™ FL by yourself.

   Unauthorized repairs may damage JuLI™ FL or alter its functionality, 

which will void your warranty. Contact

 [email protected]

 or your 

local JuLI™ FL distributor to arrange for service.

Always wipe surfaces with ethanol-soaked paper towels.

   Do not directly spray ethanol anywhere on JuLI™  FL. 

Avoid exposing JuLI™ FL to UV light

   UV light may degrade components, including plastic. Damage from UV 

exposure is not covered under the manufacturer’s warranty.

64

Summary of Contents for JuLI FL









































































Reviews:

No comments

Brands by name

Popular brands

Load more brands