· Dual scope channel can be checked at once by pressing the
Dual view button
when 2
nd
scope unit is connected to the station unit. To close dual view mode,
double click it. (or press the
Close button
.)
· If the movie should be finish press the
Stop button
, while making a movie.
· Then the confirmation message as below will be shown. Press the
OK button
.
· Unexpected problems such that the power is off suddenly or the scope unit is not
connected to station unit could be happened during making a movie. Then the
error message as below would be shown after restarting the instrument.
· Recorded data before getting in problem is saved in the disk of instrument
temporarily. So press the
OK button
to continue making a movie.
8. Recorded data can be checked in
Data menu
(Refer to page 27).
Operation
Monitoring
26
