Page 17
1. Replace 2x valves.
2. Re-fit 2x elbows, 1x tee.
3. Re-fit 2x blanking plugs.
4. Re-fit valves to bracket.
5. Re-fit valve bracket assy to dryer.
6. Attach inlet valve tubes to block.
7. Attach solenoid plugs to solenoid coils.
8. Re-fit Silencer box (
refer to 10:2
)
6. Remove 2x elbows, 1x tee,
2x blanking plugs from valves.
(See figure 5)
Assemble opposite to
dis- asssembly as follows:
5. Remove 6x (M3x30) screws, nuts, washers
and detach valves from bracket.
(See figure 4)
Figure 4.
Figure 5.
