Dear Customers,
JULY,2001
Thank you for purchasing the TEKKEN 4 PCB kit. This notice to inform you that the Dongle in
this kit is not installed in the PCB Rack assy. Please follow the following instructions make sure
that the dongles are fitted properly to the PCB.
Best regards
Dongle adjustments-To
be conducted by technicians
*The dongle included in this kit, is limited in usage for this product only.
Please DO NOT insert the dongle in other games. Inserting dongles to
other products may cause defects.
*Please make sure that the power is turned off before inserting the dongle.
1 . Loosen the screws (round head
screws M3 x 6) and remove the Dongle
cover.
2 . Insert the dongle in the slot located on the left side, make sure that the barcode
label on the dongle is facing up, and then press the dongle in until you have
confirmed that the dongle has been locked with the connector properly.
3 When finished refit the dongle cover using the screws (round head
screws M3 x 6) that were attached to the cover.
Round head
Summary of Contents for TEKKEN 4
Page 64: ......