![background image](http://html2.mh-extra.com/html/namco/tekken-4/tekken-4_operation-manual_3168016026.webp)
5. INSTALLATION AND CONNECTION To be conducted by a technician only.
Connection to
STANDARD conforming cabinet
The following describes the method of connecting the PC board to a
VIDEO
STANDARD (JVS) conforming cabinet.
First, follow the directions in “5-3
board to mounting Plate
of
VIDEO STANDARD (JVS) conforming cabinet”
13). When two
cabinets are connected with a cable for a communication-linked setup, the
PC board can be installed in either unit.
5-5-l Connecting to the control panel
The product is designed to connect to a control panel (see the diagram below) that
complies
the specifications listed in “2.
6).
P2 Start switch
PI B-direction
Button switches
P2 Button switches
Pair control
with single cabinet)
Button switches
switch
B-direction
control panel (for communication-linked setup with
two cabinets connected with cable]
above diagram shows
panel
o f a
which the PC
is installed. On the
panel of the
cabinet
the
the
buttons are for
The names of the levers and switches in the above diagrams correspond with the
general names of the control panel connection terminals (provided on cabinet) of a
VIDEO STANDARD (JVS) conforming cabinet as shown below.
PI side
Lever and switch
Control panel connection terminal
side
Lever
witch
I
n a m e r
c o n f o r m i n g c a b i n e t
c o n f o r m i n g c a b i n e t
Summary of Contents for TEKKEN 4
Page 64: ......