![background image](http://html2.mh-extra.com/html/namco/tekken-4/tekken-4_operation-manual_3168016020.webp)
5. INSTALLATION AND CONNECTION. To be conducted by a technician
Check the voltage of power supplied from the cabinet to be connected with the
edge connector and the voltage of power supplied to the coin counter in
the cabinet.
The power supplied from the cabinet connected to the
edge connector must
comply with the following specifications.
l
V power supply -allowed voltage fluctuation
current: 7 A or higher
V
A or higher
Use of non-conforming power supply can cause a fire.
Use
or
power supply for the coin counter in the cabinet. Higher
voltaae can cause the PC board to malfunction.
If
is low, the LED on the
PC board blinks. When the
LED blinks, check the power supply voltage.
Checking the
extension
harness
When connecting the product to a
STANDARD conforming cabinet, use
the extension switch harness and extension stereo harness provided in the
PC board kit.
Check to make sure the terminal numbers of the extension switch harness and
extension stereo harnesses correspond with those in the table below.
(Note) The extension switch harness and extension stereo harness are not used
when the product is installed in a
VIDEO STANDARD (JVS) con-
forming cabinet.
l
Do not connect wires to the terminals with no indication In the table.
Connection of a wire to those terminals can cause the PC board to
malfunction.
Extension switch harness
Extension stereo harness
16
Summary of Contents for TEKKEN 4
Page 64: ......