DECR-1010
2-892-597-
11(1)
2-892-597-
11
(1)
DECR-1010
Wireless controller for Reference Tool
WARNING
Carefully read this instruction manual and the instruction manual
for the compatible hardware (Development/Verification Tool for
PLAYSTATION
3) before using this product. The compatible
hardware’s instruction manual contains safety precautions for the
prevention of accidents, and instructions for the use and handling of
the hardware.
•If you come into contact with material from a damaged or leaking
battery, take the following actions:
– If the material gets into the eyes, do not rub. Immediately flush
the eyes with clean water and seek medical attention.
– If the material comes into contact with the skin or clothes,
immediately rinse the affected area with clean water. Consult
your physician if inflammation or soreness develops.
•Do not allow the battery to come into contact with fire or subject it
to extreme temperatures such as in direct sunlight, in a vehicle
exposed to the sun or near a heat source.
For customers in the U.S.A. and Canada
•Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to
operate the equipment.
• NOTICE
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
– Reorient or relocate the receiving antenna
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
•This device complies with Part 15 of the FCC Rules and RSS-Gen of
IC Rules. Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2) this device
Instruction Manual
SCE CONFIDENTIAL
must accept any interference received, including interference that
may cause undesired operation of this device.
•This transmitter must not be co-located or operated in conjunction
with any other antenna or transmitter.
•This equipment complies with FCC/IC radiation exposure limits
set forth for uncontrolled equipment and meets the FCC radio
frequency (RF) Exposure Guidelines in Supplement C to OET65
and RSS-102 of the IC radio frequency (RF) Exposure rules. This
equipment has very low levels of RF energy that it is deemed to
comply without testing of specific absorption ratio (SAR).
•If you have questions about this product, call our technical support
line at 1-800-345-7669, or write to:
Sony Computer Entertainment America
Consumer Services/Technical Support
PO Box 5888, San Mateo, CA 94402-0888 U.S.A.
Declaration of Conformity
Trade Name :
SONY
Model No. :
DECR-1010x
Responsible Party : Sony Electronics Inc.
Address :
16450 W. Bernardo Dr. San Diego,
CA 92127 U.S.A.
Telephone No. :
858-942-2230
For customers in Europe
Where you see this symbol on any of our electrical products/
packaging in Europe, it means that at end of life the product must be
disposed of separately as electrical waste in accordance with any
applicable laws or requirements for disposal of such electrical
equipment. Accordingly at end-of-life we will arrange for separate
disposal of our loan equipment including without limitation
development kits which remain at all times the property of Sony
Computer Entertainment Europe. If you would like assistance with
the disposal of any other electrical products which we have supplied
to you for business use, we can arrange a take-back service on
request. Please check http://www.devtoolrec.scee.net for more
information.
Description
This product is designed only for use with the Development/
Verification Tool for PLAYSTATION
3. For detailed instructions on
use, refer to the instruction manual of the compatible hardware or
visit your local technical support Web site.
Battery (supplied)
•Be sure to charge the battery before using it for the first time. The
battery can be charged by using the supplied USB cable to connect
the product to the Development/Verification Tool for
PLAYSTATION
3.
•Charge the battery at a temperature between 10 °C to 30 °C/50 °F
to 86 °F. Charging may not be as effective under other
environments.
US1WW.p65
06.7.14, 3:20 PM
1
