![background image](http://html1.mh-extra.com/html/namco/ridge-racer-v-arcade-battle/ridge-racer-v-arcade-battle_operators-manual_3186458062.webp)
Page 62
8-4 Repacing the Amplifier PCB
1.
Remove the floor plates.
(see 5-3 page 37)
2.
Disconnect the connectors shown shaded in the diagram below.
3.
To remove the Amplifier PCB from the locking supports, squeeze the tabs
of the support together and gently lift the PCB upwards. Repeat for each
support.
4.
Reassemble in reverse order.
PC board
< To reinstall >
< To remove >
Click!
Locking support
Pliers
Amplifier PC board
Connector