![background image](http://html1.mh-extra.com/html/namco/ridge-racer-v-arcade-battle/ridge-racer-v-arcade-battle_operators-manual_3186458052.webp)
Page 52
6-3-5 Sound Test
1.
Select SOUND TEST on the menu screen to test the audio and adjust
the volume settings. The following screen is displayed.
2.
Use the Select Up/Down switch to choose the required item then press
the Enter button.
3.
Use the Up/Down switch to change the setting.
4.
Press the Enter button to return to item select mode
5.
Select EXIT and press the Enter button to return to the menu screen.
(a)
VOLUME ALL SP
The volume levels of all speakers, during play mode, will be adjusted
at the same time with the balance between front and rear speakers
being set automatically. [0~15, DEFAULT = 08]
(b)
VOLUME ATTRACT
The volume levels of all speakers, during attract mode, will be
adjusted at the same time with the balance between front and rear
speakers being set automatically. [0~15, DEFAULT = 08]
(c)
REQUEST SONG No.
Each number produces a different sound each time the service
button is pressed. (The sound will turn off after approx 10 seconds)
Number 001 will produce a stereo test. Sound will be produced from
the left speaker then the right speaker and then both speakers.
The message on the screen will display which speaker is active.
(d)
Displays details of the Request Song No selected.
I / O TEST
VOLUME
ALL SP (0~15)
08
ATTRACT
(0~15)
08
REQUEST SONG No.
000
MESSAGE
:
EXIT
SERVICE SW : REQUEST
SELECT SW : CHOOSE ENTER SW : ENTER
(a)
(b)
(c)
(d)