![background image](http://html1.mh-extra.com/html/namco/ridge-racer-v-arcade-battle/ridge-racer-v-arcade-battle_operators-manual_3186458055.webp)
Page 55
7. INITIALIZATION
Adjustments when Replacing Parts
The following operation must
always be performed after replacing the Game
PCB, Rom, or Control Potentiometers.
The game will not operate correctly if these adjustments are not made.
1.
Slide the TEST switch ON while pressing the SERVICE switch . The
following screen is displayed.
2.
Ensure that the steering wheel is set to its centre position and both the
accelerator and brake pedals are released.
3.
Press the Enter Switch to set the new limits. The display will change to
the Switch Test screen. Turn the Steering Wheel and depress the Brake
and Accelerator Pedals to confirm that the steering and pedal controls are
working correctly.
4.
Slide the Test switch OFF.
I / F INITIALIZE
STEERING
+000
GAS
000
BRAKE
000
GO TO [SWITCH TEST] : ENTER SW
EXIT : DOWN TEST SW