![background image](http://html1.mh-extra.com/html/namco/ridge-racer-v-arcade-battle/ridge-racer-v-arcade-battle_operators-manual_3186458049.webp)
Page 49
6-3-3-3
Switch Test
1.
Select Switch Test on the I/O menu screen to test the switches.
The following screen is displayed.
2.
The display shows the current state of the switches.
3.
Press the Up Select switch and the Enter switch together to EXIT and
return to the I/O menu screen
(a)
Not Used
(b to f)
Display will change from OFF to ON each time a switch is
operated.
(g)
Numbers increase when the steering is turned to the right and
decrease when turned to the left. Right OK and Left OK is
diplayed just before the steering wheel is turned to its full
extent. Centre is displayed when the steering wheel is in the
central position.
.
(h)
Numbers increase when the accelerator pedal is pressed, and
OK is displayed just before the pedal reaches its full travel.
(i)
Numbers increase when the brake pedal is pressed, and OK
is displayed just before the pedal reaches its full travel.
(j,k,l)
The display will change from OFF to ON each time the switch
is operated.
Note:
If Left OK or Right OK is not displayed when the steering is
turned or OK is not displayed when the pedals are pressed
reinitialize the game.
(see 7 page 55)
I / O TEST
DIP SW
1234 [ON : RED]
LINK
ON
LINK AS
1 (LEFT)
SWITCH
TEST
COIN 0
SERVICE OFF
TEST ON
UP SELECT
OFF
DOWN SELECT
OFF
ENTER OFF
STEERING
+000 RIGHT OK
GAS
000 OK
BRAKE
000 OK
DOWN SHIFT
OFF
UP SHIFT
OFF
VIEW CHANGE
OFF
EXIT
SELECT SW : CHOOSE ENTER SW : ENTER
(a)
(b)
(c)
(d)
(e)
(f)
(g)
(h)
(i)
(j)
(k)
(l)