Nalu User’s Kit Instructions for Use PN: MA-000007 Rev C
Page
27
of
44
ENVIRONMENTAL CONDITIONS FOR STORAGE AND OPERATION
Therapy Disc
Storage Temperature
-18°C to 60°C
Operating Temperature
0°C to 45°C
Humidity
< 90%
Pressure
70 kPa – 107 kPa
Therapy Disc Charger
Storage Temperature
-18°C to 60°C
Operating Temperature
0°C to 40°C
Humidity
< 90%
Pressure
80 kPa – 107 kPa
Adhesive Clip
Storage Temperature
23°C
Operating Temperature
0°C to 45°C
Humidity
< 90%
Pressure
70 kPa – 107 kPa
IDENTIFICATION CARD
An identification card is included in your Nalu User’s Kit. The ID card contains information about you, your
stimulation system, and your doctor. Your identification card may allow you to bypass security devices.
Carry this
card with you at all times.
If you move, change doctors, or lose your card, contact Nalu for a replacement card.
Refer to the contact information at the end of this manual.
WHEN TO CALL YOUR CLINICIAN
Contact your clinician if any of the following events occur:
•
You have pain, redness, or swelling later than six (6) weeks after the implant procedure.
•
The stimulation is causing you to have pain or discomfort.
•
The system is not working properly.
•
You cannot adjust the stimulation using the user controls.
•
You cannot place the Therapy Disc in the optimal position to communicate with the stimulator.
•
If your Therapy Disc stops working.
•
If you lose your Therapy Disc.
•
You have excessive skin irritation, including increased redness, itchiness, and bumpiness.
Your clinician will schedule follow-up visits to make sure your device is working properly and that the stimulation is
managing your pain.
