Nalu User’s Kit Instructions for Use PN: MA-000007 Rev C
Page
21
of
44
3. Use your inserted index finger and locate the implant
site, as shown in Figure 7.
4. Once the implant site has been located, press the clip
against your skin, ensuring the heel (where the
therapy disc sits) is towards the bottom.
Placing the Therapy Disc into the Adhesive Clip
1. Slide the Therapy Disc into the open side of the clip until it clicks into place.
Ensure that the buttons are facing away from your skin, as shown in Figure
8.
Removing Therapy Disc
1. Grip the sides of the Therapy Disc.
2. Gently lift the Therapy Disc away from the surface of your skin and out of the clip, as
shown in Figure 9.
Adhesive Wear Time
1. The wear time for the Adhesive Clip varies per activity level and skin type.
2. Wear the clip until it feels like it is coming loose or starts to feel uncomfortable.
Removing the Clip
1. Remove the device from the clip.
2.
Make sure that the clip and adhesive are fully dry for easier removal
.
3. Using your finger, gently work between the adhesive and your skin to
loosen it before pulling it off, as shown in Figure 10.
4. Hold down your skin and gently peel away the adhesive until it is
fully detached as shown in Figure 11.
5. Discard the used clip.
6. It is recommended that any residue be cleaned using commercially
available wipes and sprays designed to work with hydrocolloid
adhesives.
Do not use alcohol to clean the residue.
Figure 7 Locate Implant
Figure 8 Load Therapy Disc
Figure 9 Remove Device
Figure 10 Remove Adhesive
Figure 11 Remove Clip
