Nalu User’s Kit Instructions for Use PN: MA-000007 Rev C
Page
18
of
44
Increasing Stimulation from the Therapy Disc
1. Press and release the
Up
button.
2. The green LED will blink after each button press.
Maximum Stimulation
: When at the maximum level of stimulation, further attempts to increase
stimulation will cause the buzzer to beep twice and the orange LED to blink twice.
Decreasing Stimulation from the Therapy Disc
1. Press and release the
Down
button.
2. The green LED will blink after each button press.
Minimum Stimulation:
When at the minimum level of stimulation, further attempts to reduce stimulation
will cause the buzzer to beep twice and the orange LED to blink twice.
Changing the Stimulation Program from the Therapy Disc
1. Press and release the
ON / OFF
Program button.
2. The green LED will blink after the button press. The selected program will be indicated by the number of
LED blinks. For example, if Program 4 is selected, the green LED will blink four (4) times.
NOTE
:
The Therapy Disc cycles through the programs in order. When the last program is
reached, the next program will be Program 1.
NOTE:
The maximum number of programs the Therapy Disc can hold is 8.
Low Battery Mode on the Therapy Disc
1. When the device is in low battery mode, the orange LED will blink slowly and the buzzer will beep slowly
seven (7) times every minute.
2. To dismiss the low battery indication, press and hold the Up or Down button. The white LED will remain lit
while the button is held down.
3. To reactivate the low battery indication, press and hold the Up or Down button. The white LED will remain
lit while the button is held down.
NOTE:
Low battery mode disables stimulation, and disables program change and amplitude
change buttons.
Powering OFF the Therapy Disc
1. The buzzer will beep once every second when the Therapy Disc is disconnected from the implant after
having been connected.
2. Press and hold the
ON / OFF
Program button.
3. The white LED will blink while the Therapy Disc shuts down completely. The white LED will stop blinking
after the Therapy Disc has powered off.
