A3LA-RG Guide Version B
Document Number: 451-93156-009B
73 of 180
B.62 D
–
D
IAL
Dial a data or voice call number. The dial command causes the A3LA-RG to enter
originate mode and act as an auto dialer for connection to other modems or voice
lines. The usual format is ATDnx..x where n is a Dial Modifier and x is a number. The
following are valid numbers: 0123456789*#ABC. Dial modifiers are used to alter the
manner in which the A3LA-RG dials.
L Redial last number
+
International dialing prefix. Allows the international access code to be
omitted from dial string.
>
Direct dial from phonebook locations. See subsection below for further
details.
;
Start up a voice call. This modifier should be given after the dialing digits
(or modifiers).
Any character received from the DTE during the call establishment phase will cause
the call attempted to be terminated.
B.62.1 D>
–
D
IRECT
D
IAL
F
ROM
P
HONEBOOK
The A3LA-RG and SIM contain phonebooks which have a phone number and an
alphanumeric field for each phonebook entry location. The use of V.25ter dialing
command ensures that direct dialing from phone memory and SIM phonebook is
possible through ordinary communications software which just gives the phone
number field to be filled and then uses the D command to originate the call. Available
memories may be queried with Select Phonebook Storage test cCPBS=?,
and location range for example with Read Phonebook Entries test cCPBR=?.
Execute commands:
D><str>[;]
Originate call to phone number which corresponding alphanumeric field is <str> (if
possible, all available memories should be searched for the correct entry). <str> is of
string type value and should enclosed by ““ (e.g., “John”).
D> mem<n>[;]
