A3LA-RG Guide Version B
Document Number: 451-93156-009B
61 of 180
Set command selects the procedure, how receiving of new messages from the
network is indicated to the DTE when DTE is active, e.g. DTR signal is ON.
Valid values for <mode> are:
0
Buffer unsolicited result codes in the A3LA-RG. If result code buffer is full,
older indications are discarded and replaced with the new received
indications. (default)
1
Discard indication and reject new received message unsolicited result
codes when A3LA-RG-DTE link is reserved (e.g. in in-call data mode).
Otherwise forward them directly to the DTE.
2
Buffer unsolicited result codes in the A3LA-RG when A3LA-RG-DTE link is
reserved (e.g. in in-call data mode) and flush them to the DTE after
reservation. Otherwise forward them directly to the DTE.
Valid values for <mt> are:
0
No SMS-DELIVER indications are routed to the DTE. (default)
1
If SMS-DELIVER is stored in the A3LA-RG, indication of the memory location
is routed to the DTE using unsolicited result code:
+CMTI: <mem>,<index>
2
SMS-DELIVERs (except class 2 messages and messages in the message
waiting indication group (store message)) are routed directly to the TE
using unsolicited result code:
+CMT: [<alpha>],<length><CR><LF><pdu> (PDU mode)
3
Class 3 SMS-DELIVERs are routed directly to TE using unsolicited result
codes defined in <mt>=2. Messages of other data coding schemes result in
indication as defined in <mt>=1.
Valid values for <bm> are:
0
No CBM indications are routed to the DTE. (default)
Valid values for <ds> are:
0
No SMS-STATUS-REPORTs are routed to the DTE. (default)
1
SMS-STATUS-REPORTs are routed to the DTE using unsolicited result code:
