EN
11
Inspection before operation
ENGINE OIL
CAUTION :
-Engine oil is a key factor in deciding the engine's Performace.Do not apply en
-
gine oil with additives or 2-stroke gasoline engine oil, as they haven 't enough
lubrication, which may shorten the engine's service life.
-Check the engine with it stopped on a level ground.
Check
1. Ensure that the engine is stopped on a level ground.
2. Remove the dipstick and clean it.
3. Reinsert the dipstick into the oil filler without screwing it, and check oil level.
4. If the oil level is too low , add the recommended engine oil up to
the oil filler neck.
5. Reinstall the dipstick.
CAUTION: Run with insufficent engine oil may damage the engine
severely.
OIL IN THE REDUCTION GEAR BOX( only for the model equipped with it)
1/2 Reduction gear with an auto-centrifugal clutch.
Brand of the box oil is the same as that of engine oil.
Oil capacity: 0.
6
liters
Check the oil lever in the following order.
1.Remove the dipstick and clean it.
2. Reinsert the dipstick without screwing it in , and then check oil level.
3. If the oil level is too low, add the recommended engine oil until it arrives the upper level
mark .
4. Reinstall the dipstick.
Inspection before operation
ENGINE OIL
CAUTION :
-Engine oil is a key factor in deciding the engine's Performace.Do not apply en
-
gine oil with additives or 2-stroke gasoline engine oil, as they haven 't enough
lubrication, which may shorten the engine's service life.
-Check the engine with it stopped on a level ground.
Recommended engine oil:
SAE 20W-50
Check
1. Ensure that the engine is stopped on a level ground.
2. Remove the dipstick and clean it.
3. Reinsert the dipstick into the oil filler without screwing it, and check oil level.
4. If the oil level is too low , add the recommended engine oil up to
the oil filler neck.
5. Reinstall the dipstick.
upper level mark
Dipstick
Upper level mark
Dipstick
Environmental Temperature
Summary of Contents for SM9800
