Nahita LNB003 Instruction Manual Download Page 6

 

 

 

 

 

 

 

Shift key: left arrow, click Select to move to the left. Return to the head and return. 
 
Reduce the key: down arrow, press the parameter value to reduce one number, hold down this 
key, and the parameter value decreases continuously. 
 
Increase  the  key:  the  upward  arrow,  press  the  parameter  value  to  add  a  number,  hold  down 
this key not to put, the parameter value continues to increase. 
 
Time function key: Dial symbol, press enter timing parameter setting state, and press... Until 
it returns to the normal interface. 
 
Temperature  function  key:  thermometer  symbol,  press  enter  temperature  parameter  setting 
state, then click return to normal interface. 
 
Speed  function  key:  with  arrowhead  circle,  press  enter  speed  parameter  setting  state,  then 
press back to return to normal interface. 
 
Bactericidal function key: purple with light symbol, long press 3 seconds, sterilize lamp light; 
and then press for 3 seconds, sterilization lamp extinguished. 
 
Lighting function key: bulb symbol, press the light to turn on and then close. 

Max. capacity of shelf (ml/pc) 

100mlx16, 250mlx10, 500mlx6 

Number  of  flask  clamp  as 
standard (ml/pc) 

250mlx8   

Inside Volume 

50L 

Shelf Load Bearing 

10kg/layer 

Shelf Layer 

Power Supply (50/60Hz) 

AC220V/2.5A 

NW/GW (kg

 

25/35 

4. Operation and display instructions

 

 

Summary of Contents for LNB003
















Reviews: