9
Insensitive area
dF-
False display
interval point
When the speed set value
≥
dF, both
the speed set value and the speed display
value are false display values.
(0
～
6000) 6000
3.
Time setting
1.
When Fr is set to
“
0
”
or
“
1
”
in
“
Speed---Internal Parameter Table (2)
”
, it can only
be forwarded or reversed: press the
“
Time
”
button, the number on the right side of the time
display area will flash. Use the
“
◀
”
shift button,
“▼”
decrease button,
“▲”
increase
button to set the running time, press the
“
Time
”
button again to return to the work interface,
and the time display area displays the set total. Timing time, the number decreases with the
running time, and the integer stops. Finally, it stops and the buzzer sounds. Press any key and
the buzzer will stop.
2.
When Fr is set to "2" in "Speed - Internal parameter table (2)", there is a positive and
negative function: Click the "Time" button to enter the total timing setting state, and the time
display area flashes. You can use the '
◀
' shift key, '
▼
' decrease key, '
▲
' increase key to
modify the desired set value; then click the
“
time
”
key to enter the forward rotation time (the
prompt Fd is displayed on the right). ) Set the status, modify the desired setting value by
shifting, reducing, increasing, etc.; then click the
“
Time
”
button to enter the stop timing time
(the right display prompt p-) setting status, Also modify to the desired setting value; then click
the
“
Time
”
button to enter the reverse timing time (the right display prompt Rd) setting state,
also modify to the desired setting value; then click the
“
Time
”
button , returns to the normal
display state. Complete the time setting.
Note: The total time can be selected in minutes and hours; the forward, stop, and reverse
timings are minutes.
3. Press and hold the “Time” button for about 3 seconds. The temperature display area
displays the password prompt “Lc”, and the speed display area password value is modified to
the required password value by the increase, decrease and shift keys. Then click the “Time”
button. If the password value is incorrect, the controller will automatically return to the
normal display state. If the password value is correct, it will enter the time internal parameter
setting state, and then click the “Time” button to modify each parameter in turn. Press and
hold the “Time” button for 3 seconds to exit this state and the parameter values are
automatically saved.
Time---internal parameter table
Parameter
indication
parameter
name
Parameter function description
(Range) Factory
Value
Lc-
Password
The parameter values can be viewed and modified when
"Lc=3".
0