English
User's Manual
of GLC001
Version 1, July 2023
- 21 -
the parameters, there is no need to manually confirm, and the system will
automatically flash three times to confirm the settings.
Before setting parameters using the control panel, the rotor must be correctly installed
on the shaft.
If an error is found during the parameter setting process, the parameters can be reset.
5.10.7
On the Calculation of Centrifugal Force
The relative centrifugal force is generally thousands of times the gravitational
force (g) of the Earth, and it is a unit used to measure the efficiency of various
instruments in separating or settling objects. The calculation of centrifugal force is
related to centrifugal speed and centrifugal radius, and is calculated according to the
following equation:
RCF=11.1
8
×（
n/1000
）
2×r
r: Is the centrifugal radius, in cm;
n: Centrifugal speed in rpm (revolutions per minute)
Note: "The maximum centrifugal force value is related to the maximum
centrifugal radius";
The "centrifugal force value" set should take into account the radius of
the rotor and the shape of the centrifugal container.
