English
User's Manual
of GLC001
Version 1, July 2023
- 19 -
→
make the number in the display window of the rotor number flash
→
turn
the parameter adjustment knob key to set the rotor number to 4002.
5.9.3
Speed setting：
Press the
key on the control panel
→
make the
numbers in the Speed Set display flash
→
turn the parameter
adjustment knob key to set the speed to 4000. Note: The Rf value is
automatically converted with the speed value
5.9.4
time setting：
On the control panel, press the
key
→
make
the minute number in the time display column flash (the corresponding two
digit Unit of time)
→
turn the parameter adjustment knob key to set the
time to 20
The selected parameter adjustment situation is as follows: the
parameter adjustment knob key can be pressed vertically
downwards or the system will automatically flash three times as the
default.
5.9.5
Speed up and down setting (the acceleration and deceleration
settings for starting the machine to run the rotor to the set speed
and stopping the machine from running, with values ranging from 0
to 9. The higher the value, the shorter the time it takes):
Press the
key continuously to make the numbers in the Acc display flash
→
turn the parameter
adjustment knob key to set the speed to 5. Press the
key again to make the
numbers in the Dec display flash. Rotate the parameter adjustment knob to set the
speed to 3. Note: When DEC is set to 0, the shutdown is free parking, and the system
has no brake intervention!
After setting, it is shown in the following figure:
