North American Clutch & Driveline
Rockford, Illinois
Phone: (800) 383-9204
(815) 282-7960
Fax (815) 282-9160
www.naclutch.com
57
57
Figure 39. Inspect bearing journals and seal journals
Shafts, Seal lip Contact Surfaces And Bearing Journals
9. Inspect machined surfaces for burrs, scratches, nicks and foreign matter. If such defects
cannot be removed with crocus cloth or a soft stone, replace the part.
10. Inspect bearing journals on the shaft for grooved, burred or galled conditions that would
indicate that the bearing has been turning on the shaft. If the damage cannot be repaired to
like-new condition with a crocus cloth, replace the part. Bearing journal diameters must not be
less than the dimensions shown in the Wear Limits Description and Specification section of this
manual.
11. Inspect the pilot bearing journal on the clutch shaft. If it is worn in any way, or if it shows
signs that the pilot bearing has been turning on the journal, replace the clutch shaft. Pilot
bearing journal diameters must not be less than the dimensions shown in the Wear Limits
Description and Specification section of this manual.
