SFRA45 User Manual
5-1
5
Using the menus
The SFRA45 is a very versatile instrument with many
configurable parameters. These parameters are
accessed from the front panel via a number of menus
shown in the table below
ACQU
Data acquisition parameters (speed,
filtering)
SWEEP
Frequency Sweep Control
TRIM
Generator Trim Control
COMMS
Communications Option
OUT
Signal Generator Control
CH1
Channel 1 Input Control
CH2
Channel 2 Input Control
SYS
General Systems Options
MODE
Function Control
PROG
Recall / Store / Delete of non-volatile
programs
Each menu starts with the currently set parameters visible
but no cursor. In this condition, pressing the menu key
again or the HOME key aborts the menu operation and
reverts back to normal operation.
To select any parameter, press the UP or DOWN key and a
flashing box will move around the menu selecting each
parameter. In this condition the keys take on their
secondary function such as numbers 0-9, multipliers n-G
etc.
