SFRA45 User Manual
8-14
8.9
System Key Functions
Language –
These menu options depend on the (Country)
firmware loaded, ie Italy will provide a choice of Italian or
English etc.
Initial settings –
This setting has three options which set
the instrument initial settings at switch on. These are
either the settings stored in memory program 1, as per the
factory default or the settings which were last used.
Set Clock –
This option sets the time. Use the UP/DOWN
arrow keys to highlight hours, minutes or seconds, and the
LEFT/RIGHT arrow keys to change the time.
Set Date –
This option sets the date.
Use the UP/DOWN
arrow keys to highlight the month, day or year, and the
LEFT/RIGHT arrow keys to change the date.
Display
– Has three options: “
colour”
, “
white on black”
and
“black on white”
. The white on black option is easier
to see in natural daylight due to the shielding in the glass
of the display. Glare does occur in direct sunlight.
Brightness
– The instrument display has two options,
“
low”
and
“high”
. The default setting is ‘low’ to conserve
battery power. This option works best in the ‘colour’ or
‘white on black’ mode and makes the display easier to see
in natural daylight.
Enlarge Results –
Has two options
“on”
or
“off”
and
changes the size of the text/numbers on the display. Each
instrument mode is different.
Phase Convention
– This is available in both “LCR” and
“FRA” mode and displays the phase angle between the
