G r i z z l y
v e r . 2 0 1 8 - 0 7 - 0 2
24
Fig.8.26.-E - CORRECT
Fig.8.26.-E' - WARNING, WRONG!
Fig.8.26.-F - CORRECT
Fig.8.26.-F' - WARNING, WRONG!
8.27. Seat disassembly
Fig.8.27.-A
To remove the seat from the frame, proceed as follows in the determined sequence:
a) Activate the central brake so that the rehab buggy is stable and immobilized (see
Fig.8.27.-A)
b) set the seat inclination angle to a 0° position, i.e. the seat plane is set parallel to the
ground (see Fig.8.27.-B and see 8.32. Angular seat adjustment)
c) pull the transverse grip of the rear seat attachment mechanism backwards, which
starts the opening of the locking of the seat attachment mechanism (see Fig.8.27.-C)
d) pull the transverse handle of the attachment mechanism of the seat backward which
starts the opening of the locking mechanism of the seat attachment, then continue
pulling the transverse handle backwards and upwards, causing the seat locking mechanism to stop in an open position
(see Fig.8.27.-D)
e) then remove both FRONT attachments of the seat from the hooks of the frame, by lifting the front of the seat
upwards, from the ground (see Fig.8.27.-E)
f) then pull both REAR backrest attachment of the seat from the hooks of the frame, by lifting the back of the seat at
an angle forward, to the front of the seat and up, from the ground (see Fig.8.27.-F)
Fig.8.27.-B
Fig.8.27.-C
Fig.8.27.-D
