G r i z z l y
v e r . 2 0 1 8 - 0 7 - 0 2
34
c) to the front and back and diagonally, perpendicular to the backrest plane (see Fig.8.45.-C)
The right and left thoracolumbar supports can be adjusted symmetrically or independently, depending on the
individual needs of the child.
The assembly and disassembly of the thoracolumbar supports is equivalent to their adjustment, which is detailed
below.
To adjust the thoracolumbar supports along the backrest plane (right, left, up, and down), slide the upholstery clasp
on the front and back of the backrest, and then unscrew two knobs for each of the thoracolumbar supports. These
knobs are located on the back of the backrest, in the guides for the thoracolumbar supports (see Fig.8.45.-D). Then
you can move the thoracolumbar support into a suitable and safe place for the child on the front of the backrest. After
setting the thoracolumbar supports in the desired position, screw each of them back with two knobs, tightening them
until you feel the resistance. Finally place the upholstery clasp on the front and back of the backrest.
Fig.8.45.-A
Fig.8.45.-B
Fig.8.45.-C
Fig.8.45.-
D
Fig.8.45.-
E
In order to adjust the thoracolumbar supports perpendicular to the backrest plane
(backward and forward adjustment), unscrew two other knobs for each of the
thoracolumbar supports. These knobs are located on the thoracolumbar supports, on
their outside (see Fig.8.45.-E). Then proceed as in the case of the thoracolumbar supports
adjustment along the backrest plane.
8.46
.
Hip supports adjustable in three planes
(accessories)
The Grizzly rehab buggy can be fitted with hip supports. Mounting and adjusting the hip supports to the right and left
determines the usable width of the seat (see 8.30 Seat width adjustment). For specific indications, the hip supports
also stabilize the child's hips. In this case, the regulation of the ilial area is achieved by moving the hip supports in
three planes:
a) to the right and left and diagonally, along the plane of the seat (see Fig.8.46.-A)
b) to the front and the back and diagonally, along the plane of the seat (see Fig.8.46.-B)
c) up and down and diagonally, perpendicular to the plane of the seat (see Fig.8.46.-C)
