G r i z z l y
v e r . 2 0 1 8 - 0 7 - 0 2
22
8.25. Seat attachment mechanism for rehab buggy frame
Fig.8.25.
The seat attachment mechanism for the rehab buggy
frame is located in the rehab buggy seat, from below.
It consists of:
a) transverse handle (see Fig.8.25, no. 4)
b) two locks of the mechanism (see Fig.8.25, no. 2
and 6)
c) two front seat attachments (see Fig.8.25, no. 1
and 7)
d) two rear seat attachments (see Fig.8.25, no. 3
and 5)
It is used to mount the seat to the frame, keep the seat
in the frame and to remove the seat from the frame of
the rehab buggy.
8.25.1 Opening the lock in the seat attachment mechanism to the rehab buggy frame
Fig.8.25.1.-A
Fig.8.25.1.-B
To unlock the mechanism, pull the transverse
handle backwards and open the lock (see
Fig.8.25.1.-A), then continue pulling the transverse
handle backwards and upwards, causing the lock
to stop in an open position (see Fig.8.25.1.-B).
8.25.2. Closing the lock in the seat attachment mechanism to the rehab buggy frame
Fig.8.25.2.
In order to close the lock mechanism, the seat must be mounted correctly on
the rehab buggy frame (see section 8.26 Seat assembly), which will cause the
lock to slam shut into a closed position
(see Fig.8.25.2.).
8.26. Seat assembly
The seat can be mounted to the front or to the direction of travel. To mount the seat to the frame, perform the
following steps in the indicated order:
a) activate the central brake so that the rehab buggy frame is stable and immobilized (see Fig.8.26.-A)
b) set the rehab buggy frame hooks to the seat assembly in a 0° position (see Fig.8.26.-B and see 8.32. Angular seat
adjustment)
c) make sure that the seat attachment mechanism for the rehab buggy frame is in a position with an open lock (see
Fig. 8.26.-C and see 8.25.1. Opening the lock in the seat attachment mechanism to the rehab buggy frame)
