MyTurn GlobalPC, Getting Started Manual, Page: 91 / 102

S
OLVING
P
ROBLEMS
A-3
sion’s input jack. If your TV doesn’t have an input jack, you’ll need to use the TV
converter. (see Display Installation on page 1-10 for instructions on how to connect
the GlobalPC to a TV using an TV converter).
• Is the display itself turned on?
Make sure your display is turned on. If you are using a monitor, look for a button
(should be round or square) on the outside, front edge of the monitor and make sure it
is on. A small green light will be illuminated when the monitor is in the ON position.
• Is the GlobalPC in sleep mode?
When the computer is in sleep mode, the on/off light on the front panel is not illumi-
nated so it appears as if it’s turned off. Press the button on the front of the GlobalPC.
You’ll know whether the monitor was in sleep mode if, once you press this button, the
screen pops up with an image.
My computer seems to be on but all I see on the screen is a TV show.
If your TV is still showing sitcoms and reruns when you want to run your GlobalPC, ask
yourself the following:
• Are you on the correct channel?
If you are using an TV converter, try switching to channel 3 or 4.
• Did you try using the AUX channel?
If your TV supports multiple modes, then you may need to use AUX instead of chan-
nels 3 and 4.