6
•
The W4B-120C is configured for negative ground systems. There are no parts in the
wind charger’s negative leg. The enclosure can be grounded using the ground termi-
nal in the wiring compartment.
•
There are fuses or mechanical parts inside the W4B-120C to reset or change.
The W4B-120C is rated for indoor use. The wind charger is protected by conformal
coated circuit boards, stainless steel hardware, anodized aluminum, and a powder
coated enclosure, but it is not rated for corrosive environments or water entry.
•
The construction of the W4B-120C is 100% solid state.
With bulk charging, absorption, float and equalization stages.
•
The W4B-120C will accurately measure time over long intervals to manage events
such as automatic equalizations or battery service notification.
•
LED’s, a pushbutton, and LCD meters provide both status information and various
manual operations.
